Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in South Whittier, CA
Gate installation in South Whittier means working with 1950s and 60s tract homes on compact lots, where driveway openings were poured decades ago and rarely match today’s standard gate sizes. We measure every opening, check the existing posts, and quote a gate that fits the actual space. If your gate is sagging at the hinge post, rusted through, or the operator stopped responding, call (833) 620-0289 and we’ll tell you what’s actually wrong before any work is quoted.
Why South Whittier Homes Are Different
South Whittier is an unincorporated Los Angeles County island wedged between the incorporated cities of Whittier and Santa Fe Springs. That means gate work here answers to LA County building and permitting rules, not the City of Whittier’s. Homeowners who assume “Whittier” rules apply often get surprised when a driveway gate or automatic operator install triggers a county-level review. We deal with that distinction constantly and can tell you up front whether your specific project needs county approval.
The housing stock itself is mostly 1940s through 1970s single-story stucco tract homes along corridors like Mulberry, Telegraph, and Painter Avenue frontage. Driveway security gates, side-yard access gates, and low property-line fences dominate. Original steel posts and hinges are frequently rusted and out of plumb after decades. The tight lot lines mean replacement gates often have to fit very specific, non-standard openings. Add in hot, dry inland summers with Santa Ana wind events, year-round sun baking exposed metal, and mild wet winters driving rust at hinge and latch points, and you get gate failures that show up faster here than in coastal LA. UV and dust also wear driveway gate operators and rollers down sooner than homeowners expect.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main South Whittier Services
Most South Whittier homeowners call us for one of two reasons: a gate that physically won’t open or close, or an electric system that stopped responding to remotes and keypads. Here’s what each one involves locally.
Gate Repair in South Whittier
A sagging gate on a 1950s South Whittier driveway usually comes down to a rusted hinge post or a weld that failed after decades of sun and Santa Ana wind. We cut out the rusted section, reset the post in concrete, repair or replace hinges, and re-hang the gate so it swings true. On wood gates, we repair split pickets and replace rotted rails. On iron gates, we grind, patch, and repaint to stop the rust from spreading. Every repair starts with a diagnostic visit, not a quote over the phone. Gate Repair in South Whittier.
Electric Gate Repair in South Whittier
When a South Whittier gate operator stops responding, the cause is usually one of three things: a control board fried by heat or a power surge, a sensor knocked out of alignment by wind or a bumped post, or a motor burned out from years of grinding against a misaligned gate. We diagnose the exact failure, repair what’s broken, and re-tune the whole system so the motor isn’t fighting the gate. We work on the operator you already have, whether it’s a LiftMaster, FAAC, BFT, DoorKing, Viking, Elite, or Mighty Mule. Electric Gate Repair in South Whittier.
Gate Installation in South Whittier
Gate installation in South Whittier usually means fitting a new gate to an opening that was framed in the 1950s or 60s and was never square. We measure the actual opening, account for the slope of the driveway, and install a gate that clears the ground through its full swing. On automatic systems, we run the operator wiring, install the safety edges and sensors, and program the remotes and keypad. Every installation is quoted before work starts, so you know the full price up front. For a deeper look at what a full install covers, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
The gate works manually but you’re tired of getting out of the car to open and close it, or the existing operator is dead and not worth repairing.
What it costs in South Whittier
Automatic gate installation in South Whittier typically runs from $2,500 to $5,500 depending on operator type, gate weight, and whether new wiring needs to be run.
How we do it
We mount the operator, run low-voltage wiring to the power source, install safety edges and photo eyes, set the open/close limits, and program remotes and keypad codes.
Driveway Gate Installation
Signs you need it
The existing gate is sagging past repair, rusted through at the bottom rail, or too narrow for today’s vehicles.
What it costs in South Whittier
Driveway gate installation in South Whittier typically runs from $1,500 to $4,000 for a new swing or sliding gate, depending on material and opening width.
How we do it
We pull the old gate, set new posts in concrete if the existing ones are too far gone, hang the new gate, and adjust the hinges and latch until it swings level and closes cleanly.
Sliding Gate Installation
Signs you need it
The driveway slopes up from the street or the opening is too wide for a swing gate, and you need a gate that tracks sideways instead of swinging out.
What it costs in South Whittier
Sliding gate installation in South Whittier typically runs from $3,000 to $6,000 including the track, wheels, motor, and safety system.
How we do it
We pour a level track bed, mount the gate on rollers, install the operator and limit switches, and set the safety edges along the closing edge.
What Gate Installation Costs in South Whittier
| Item | Typical range in South Whittier |
|---|---|
| Driveway gate installation (swing or sliding) | $1,500 – $4,000 |
| Automatic gate installation (with operator) | $2,500 – $5,500 |
| Sliding gate installation (with track and motor) | $3,000 – $6,000 |
How long does gate installation take in South Whittier?
Most South Whittier gate installations take one day for the gate and a second day for automation, assuming the posts are sound. If we’re setting new posts or pouring a track bed, add a day for concrete to cure before hanging the gate.
Do I need a county permit for a new gate in South Whittier?
Because South Whittier is unincorporated LA County, automatic driveway gates and some new gate posts can require county approval. We’ll tell you during the estimate whether your specific project needs a permit, and we handle the paperwork if it does.
Brands We Service in South Whittier
We’re trained on nine major gate automation brands, so when a South Whittier gate acts up we work on the system you already own. On most South Whittier service calls we carry common parts for DoorKing, Elite, Mighty Mule, and LiftMaster operators, which covers a large share of what’s installed on local driveways. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in South Whittier, CA
| Service | Typical range in South Whittier |
|---|---|
| Gate repair (hinges, posts, welding, realignment) | $180 – $500 |
| Electric gate repair (diagnostic and component repair) | $250 – $700 |
| Driveway gate installation | $1,500 – $4,000 |
| Automatic gate installation | $2,500 – $5,500 |
| Sliding gate installation | $3,000 – $6,000 |
| Gate opener motor replacement | $400 – $900 |
| Control board replacement | $250 – $650 |
| Sensor or safety edge repair | $150 – $350 |
Prices in South Whittier run higher when a gate opening is non-standard, posts need to be re-set in concrete, or the operator wiring has to be trenched across an older lot. Every job is quoted and agreed before any work starts, so the number we give you is the number you pay.
Neighborhoods We Serve in South Whittier
We cover all of South Whittier’s ZIP 90605, including the tract areas along Telegraph Road, Mulberry Drive, Painter Avenue, and the residential streets between Whittier and Santa Fe Springs. Most service calls get a same-week visit, and emergency gate repairs can often be scheduled within 24 to 48 hours.
- Telegraph Road corridor
- Mulberry Drive area
- Painter Avenue frontage
- Lambert Road tract homes
- North Whittier border streets
Service Area – Cities Near South Whittier
Gate Repair South Gate serves South Whittier and the surrounding southeast LA County area. If you’re in a neighboring city, we also cover La Mirada, CA, Pico Rivera, CA, Cerritos, CA, and Hacienda Heights, CA. Call (833) 620-0289 and we’ll confirm coverage for your address.
Serving South Whittier, CA – Our Local Coverage Area
We’re based in the South Whittier area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in South Whittier
Most South Whittier emergency gate repairs are scheduled within 24 to 48 hours. If a gate is stuck open and the property is unsecured, let us know when you call and we’ll prioritize the visit.
Because South Whittier is unincorporated LA County territory, some new gate posts and automatic operators trigger county review. We’ll confirm during the estimate whether your specific project needs a permit and handle the county paperwork if it does.
Yes. We work throughout unincorporated LA County and know the permitting distinctions between county and incorporated city rules. South Whittier’s ZIP 90605 is core coverage for us, and we handle both residential and commercial gate systems in the area.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What South Whittier Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Gabriela Castillo"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Amit Reddy"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Kevin Novak