Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pico Rivera, CA
Gate installation in Pico Rivera usually runs between $2,850 and $9,600 for an automatic driveway gate, with most jobs landing around $4,500 to $6,800 depending on materials, operator type, and whether we’re pulling new electrical. What makes Pico Rivera different is the housing: 1950s and 1960s tract homes on narrow lots with original driveway gates hung on wooden posts that have shifted in the region’s expansive clay soil. We’re a dedicated gate specialist, not a fencing company that also touches gates. If your gate won’t open, sags against the latch, or needs a full replacement, call us at (833) 620-0289 and we’ll give you a straight answer and a free estimate.
Why Pico Rivera Homes Are Different
Pico Rivera’s housing stock is overwhelmingly post-WWII stucco tract homes and mid-century bungalows, and that shapes nearly every gate job we do here. The original driveway and side-yard gates on these properties were typically hung on 4×4 wooden posts set directly into the native clay soil. Over six or seven decades, the combination of hot, dry summers and winter rain cycles causes that clay to expand and contract, which heaves posts out of plumb. The result is a gate that drags on the concrete, won’t latch, or binds against the jamb. New gate installation in Pico Rivera almost always includes setting new steel posts in concrete, because anchoring to the original wood posts means inheriting the same problem.
Then there’s the city itself. Pico Rivera enforces front-yard setback and fence-height rules, and on many of these narrow lots, driveways are shared or run tight along the property line. That means a gate has to sit exactly where the city allows it, open without swinging over a neighbor’s driveway, and stay under the height limit. We measure against the actual site, not a guess, before any steel is ordered. Seasonal Santa Ana winds also dry out wooden gates and loosen hinge hardware, so we lean toward steel frames and heavy-duty bearings on anything that faces an open street.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Pico Rivera Services
Most calls we get in Pico Rivera start with one of two problems: a gate that’s physically broken, or a gate that won’t respond to its opener. Both are things we fix every week here.
Gate Repair in Pico Rivera
Gate repair in Pico Rivera usually means correcting years of clay-soil movement: sagging gates, dragging corners, hinges that have pulled out of weathered wood, and latches that no longer line up. We also rebuild posts, replace bent frames, and correct gates that swing past their stops. The fix isn’t a band-aid; it’s realigning the gate to the property and reinforcing what shifted. On narrow lots with shared driveways, we’re careful to keep the gate’s swing arc entirely inside the owner’s line. For the full breakdown of what gate repair costs and what we cover, see Gate Repair in Pico Rivera.
Electric Gate Repair in Pico Rivera
Automatic gates fail in Pico Rivera for the same reasons everywhere else, but the clay soil adds one local twist: when a post shifts, it puts drag on the operator motor, which cooks the capacitor or strips the drive gear. We diagnose the whole system from the motor to the keypad, not just the symptom. That means testing the control board, limit switches, safety sensors, remote receivers, and the gate’s mechanical movement before recommending a repair. When we can fix the existing system, we fix it. We don’t sell replacements as a first resort. See Electric Gate Repair in Pico Rivera for the full scope.
Gate Installation in Pico Rivera
New gate installation in Pico Rivera starts with a careful site measure, because most of these 1950s and 1960s lots have narrow driveways, existing concrete, and original posts that can’t be trusted to carry a new gate. We build around the site’s actual conditions: clay-soil heave, setback rules, and how the gate needs to open without blocking a shared drive. Whether it’s a manual steel driveway gate or a fully automated system with keypads and sensors, the price is always quoted and agreed before any work begins. For a broader look at the service, see Gate Installation.
Automatic Gate Installation
Signs you need it
You want to open and close the gate from inside the car or house, rather than getting out to swing it manually.
What it costs in Pico Rivera
Automatic gate installation in Pico Rivera typically runs $3,400 to $9,600 including the gate, operator, and electrical run.
How we do it
We measure the driveway width and slope, set steel posts in concrete, mount the gate panel, install the operator and safety edges, then run power and test the full cycle.
Driveway Gate Installation
Signs you need it
The old gate has rotted posts or a bent frame, and repairing it no longer makes sense.
What it costs in Pico Rivera
A new driveway gate in Pico Rivera, manual or automatic, generally runs $2,850 to $8,900 depending on width, material, and automation.
How we do it
We remove the old gate and posts, pour new concrete footings, set level steel posts, hang and adjust the new gate, and confirm it clears the drive and latches square.
Sliding Gate Installation
Signs you need it
The driveway slopes up from the street, or there isn’t room for a swing gate to arc inward without blocking a car or a shared drive.
What it costs in Pico Rivera
Sliding gate installation in Pico Rivera usually lands between $3,800 and $9,200 because it requires a track, roller trucks, and often a longer operator run.
How we do it
We set the track and posts on level footings, build the sliding panel to fit the opening, install roller trucks and a catch post, then mount and program the operator.
What Gate Installation Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Manual driveway gate (steel) | $2,850 – $5,200 |
| Automatic driveway gate (single swing) | $3,400 – $7,100 |
| Sliding gate with operator | $3,800 – $9,200 |
Do I need a permit for a new gate in Pico Rivera?
It depends on height and placement. Pico Rivera enforces fence and gate height rules and front-yard setbacks, and a gate over the allowed height or too close to the property line can trigger a permit requirement. We measure against the city’s rules before you commit.
How long does a gate installation take in Pico Rivera?
Most residential gate installations finish in one to two days once materials arrive. Posts need time to cure in concrete before we hang weight on them, and custom gate panels usually add a week or two for fabrication.
Brands We Service in Pico Rivera
We service gates and operators from Ghost Controls, Mighty Mule, DoorKing, and Elite, among others. We keep common control boards, remotes, and safety sensors for these brands in stock, which means most repairs in Pico Rivera are completed the same day with no waiting on a special-order part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pico Rivera, CA
| Service | Typical range in Pico Rivera |
|---|---|
| Gate repair (labor and common hardware) | $180 – $480 |
| Hinge replacement or post reset | $250 – $550 |
| Electric gate diagnostic | $95 – $185 |
| Control board replacement | $350 – $850 |
| Operator motor replacement | $550 – $1,400 |
| Keypad and intercom replacement | $260 – $800 |
| Manual driveway gate install | $2,850 – $5,200 |
| Automatic gate installation | $3,400 – $9,600 |
| Sliding gate installation | $3,800 – $9,200 |
What pushes cost up in Pico Rivera is usually the condition of the existing posts: if we’re setting new footings in clay soil, that’s more concrete and more labor than swapping a gate panel. Every project is quoted in writing and agreed before any work starts, so the number we give is the number you pay.
Neighborhoods We Serve in Pico Rivera
We work across all of Pico Rivera, from the streets around Rio Hondo Park to the neighborhoods south of Whittier Boulevard and east toward the San Gabriel River. Pico Rivera isn’t a sprawling city, so a technician can typically reach any address in the 90660, 90661, and 90662 ZIP codes quickly. Gate repair calls are almost always scheduled the same day; new installations are booked by appointment after the site measure.
- Rio Hondo Park area
- Pico Park neighborhood
- Smith Park area
- South of Whittier Boulevard
- Rivera Park neighborhood
Service Area – Cities Near Pico Rivera
In addition to our regular work in Pico Rivera, we take gate repair and installation calls from nearby Bell Gardens, CA, South Whittier, CA, Monterey Park, CA, and Maywood, CA. Most of those cities are within a twenty-minute drive of our South Gate location.
Serving Pico Rivera, CA – Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pico Rivera
For emergency gate repair in Pico Rivera, we can typically have a technician on site the same day you call, often within a few hours. We carry common parts and diagnostic equipment in the truck, so most opener and motor failures are diagnosed and fixed in one trip. Call (833) 620-0289 and we’ll give you a real arrival window, not an open-ended “sometime today.”
We don’t file HOA paperwork, but we’ll give you a spec sheet with dimensions, materials, and colors so you can get approval from your association. Many Pico Rivera HOAs and landlords ask for exactly that before they sign off, and we’re glad to provide it at the free measure.
Yes. Every new gate installation and most repair jobs start with a free on-site estimate in Pico Rivera. We measure the actual driveway, check the existing posts and electrical, and give you a written price before any work begins, so there’s no surprise on the invoice. Call (833) 620-0289 to book yours.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Pico Rivera Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Rachel Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Nicole Anderson"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Wade Quinn