Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Torrance, CA
Gate installation in Torrance often means working around what’s already in the ground. Many homes west of Crenshaw and through Old Torrance still carry their original 1950s and 60s steel or wood driveway gates, set on footings poured before modern seismic codes existed. The Palos Verdes fault zone runs close, and the sandy soil here shifts more than homeowners expect. That means new gates need deeper posts, better bracing, and operators sized for the marine humidity that never quite leaves. We’re Gate Repair South Gate, and we’ve served Torrance since 2013. If your gate is sagging, sticking, or dead at the keypad, call (833) 620-0289 for a straight answer and a free estimate.
Why Torrance Homes Are Different
Torrance isn’t one housing market. The post-war tracts between 1945 and 1975 dominate the center and north, with original wood side-yard gates and steel driveway gates that have soaked up decades of coastal air. South and east Torrance are different again, with newer infill and townhome projects using vinyl and aluminum, materials that don’t rust but do flex and rack under Santa Ana wind loads. The marine layer keeps humidity high year-round. Wood swells and binds against the frame. Steel rusts at the hinge welds and along the bottom rail where sprinkler overspray hits every morning. And because much of the city sits on sandy, shifting soil over the fault zone, posts that looked plumb five years ago now lean an inch or two, enough to throw a gate off its track or make a latch miss its strike by a half-inch. We see the same failure pattern across 90501, 90503, and 90504: original shallow footings, rusted hardware, wood that’s soft at the edges. It’s not a cosmetic issue. It’s geometry, and geometry decides whether a gate opens or binds.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Torrance Services
Most Torrance calls fall into two groups: the gate physically won’t move, or the motor runs and nothing happens. Both are usually fixable same-day if we can get the right part locally.
Gate Repair in Torrance
When a gate drags across the driveway or hangs at an angle, the cause in Torrance is usually a settled post, swollen wood, or a rusted hinge pin, sometimes all three. We re-set posts in fresh concrete, re-plumb frames, replace hinges and rollers, and rebuild the gate to clear the ground properly. Homes in the older tracts often need new steel frames around original wood panels, and that’s work we do without pushing a full replacement unless it’s actually necessary. If your gate scrapes, jams, or won’t latch, see the full breakdown on our Gate Repair in Torrance page.
Electric Gate Repair in Torrance
Automatic gates near the coast develop their own problems: salt air eats at control board connections, moisture trips safety sensors, and sandy soil lets the operator’s post shift just enough to bind the arm or chain. We diagnose by brand, not by guesswork, and we service LiftMaster, FAAC, BFT, DoorKing, Viking, and the other major systems without nudging you toward an upgrade you don’t need. From the motor to the keypad, we test the whole circuit and replace only what’s failed. Read specifics on our Electric Gate Repair in Torrance page.
Gate Installation in Torrance
Gate installation in Torrance starts with what’s already under the soil. Homes built between 1945 and 1975 often have shallow footings that cracked decades ago, so a new gate on those old pads will settle and sag within a few seasons. We dig deeper, set steel posts in fresh concrete below the frost line, and size the frame for coastal humidity and Santa Ana wind. Whether you’re replacing a rusted steel gate on a 1950s tract home near Old Torrance or adding an automatic driveway gate to newer construction south of 190th, the installation has to account for shifting soil and salt air or it won’t last. We’re a dedicated gate company, not a fencing crew that does gates on the side, and we handle the full job from the first measurement to the final operator settings. For full details on what a new gate includes, see our Gate Installation overview.
Automatic Gate Installation
Signs you need it
You’re manually dragging a heavy gate across the driveway every morning, or the existing operator is dead and the gate is too large for a basic replacement motor.
What it costs in Torrance
Full automatic gate installation in Torrance typically runs $3,800 to $8,500 depending on gate size, operator brand, and how much concrete work the site requires.
How we do it
We set the gate and posts, mount the operator, run power, install safety edges and photo eyes, then program remotes and keypads and test the full cycle.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street or you have limited swing clearance, and a sliding gate is the only layout that fits the property line.
What it costs in Torrance
Sliding gate installation in Torrance typically costs $4,200 to $9,000, with the price driven by gate weight, track length, and operator duty cycle.
How we do it
We pour a reinforced track bed with proper drainage, set the gate on rollers, mount the motor, and calibrate the travel limits and safety stops.
What Gate Installation Costs in Torrance
| Item | Typical range in Torrance |
|---|---|
| Automatic gate + operator installed | $3,800 – $8,500 |
| Sliding gate with track and motor | $4,200 – $9,000 |
| Steel driveway gate, double-swing | $2,600 – $6,500 |
Do I need a permit for a new driveway gate in Torrance?
Torrance requires permits for new driveway gates that include an automatic operator, and setback rules depend on your lot and street frontage. We check the current city requirements during the estimate and build the paperwork into our quote, so there’s no surprise fee later.
How long does a typical Torrance gate installation take?
Most residential installs take one to two days once concrete work is done. If we’re replacing an existing gate on sound posts, it’s usually a single day. Call (833) 620-0289 for a schedule estimate.
Brands We Service in Torrance
We’re certified on nine major gate automation brands, so your existing system isn’t a mystery to us. If you’ve got a Ghost Controls board that’s dead, a DoorKing arm that’s grinding, or an Elite or Mighty Mule operator we service those regularly. Common control boards and safety edge parts for these brands are stocked locally, so repairs often happen the same visit. See our brands page for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Torrance, CA
| Service | Typical range in Torrance |
|---|---|
| Gate repair, post re-set | $450 – $1,200 |
| Hinge and roller replacement | $180 – $450 |
| Wood gate frame rebuild | $350 – $900 |
| Electric gate motor replacement | $600 – $1,700 |
| Control board replacement | $280 – $750 |
| Keypad or remote programming | $95 – $220 |
| Safety sensor replacement | $150 – $400 |
| Automatic gate + operator installed | $3,800 – $8,500 |
| Sliding gate installation | $4,200 – $9,000 |
| Gate Installation (complete) | $2,600 – $6,500 |
Prices push toward the high end in Torrance when we’re digging through old cracked footings, re-pouring concrete in sandy soil, or replacing rusted steel frames that the marine air has chewed through. Every quote is written down, explained, and agreed to before we start work.
Neighborhoods We Serve in Torrance
We run service calls through every part of Torrance, from the older tract streets near Old Torrance and west of Crenshaw to the newer developments south of 190th and east toward the 110. The gate problems shift a little by area, but the fix is the same: diagnose first, repair what’s broken, and never sell a replacement when a repair does the job.
- Old Torrance
- West Torrance
- South Torrance
- North Torrance
- Walteria
Most Torrance calls get a same-day or next-day visit, depending on parts availability and what the gate needs.
Service Area – Cities Near Torrance
Gate Repair South Gate is based in South Gate, and we run routes into the surrounding cities regularly. If you’re in Vermont Vista, CA, Watts, CA, South Gate, CA, or Florence-Graham, CA, our technicians cover those areas too. Call and we’ll let you know when we’re rolling through.
Serving Torrance, CA – Our Local Coverage Area
We’re based in the Torrance area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Torrance
We run same-day service for urgent gate failures in Torrance, particularly when a gate is stuck open or won’t close and the property is unsecured. Call (833) 620-0289 early in the morning and we’ll give you a straight time window, not a vague promise.
Yes, we work with HOA boards and property managers across Torrance on common-area gates, entry systems, and pedestrian gates. We carry the commercial-grade parts for FAAC, BFT, and DoorKing operators, and we can stage repairs around board approval timelines.
We cover all four Torrance ZIP codes: 90501, 90502, 90503, and 90504. That includes Old Torrance, West Torrance, South Torrance, North Torrance, Walteria, and the newer infill developments on the south and east sides of the city.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Torrance Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Wade Quinn"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Gabriela Castillo"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Amit Reddy