Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in South Gate?
Gate repair in South Gate typically costs $150 to $650 for most residential fixes, with the average job landing around $280. Electric gate repairs that involve a motor, control board, or safety sensor usually run $250 to $900, and commercial swing or slide gate work for multi-unit properties can reach $1,200. We give firm quotes up front before any work starts. Call (833) 620-0289 for a free estimate.
Gate Repair Cost Breakdown (2026)
These are the ranges we see most often across South Gate, from the Hollydale and Firestone Park neighborhoods to the commercial corridors along Tweedy Boulevard and Garfield Avenue. Prices reflect labor and standard parts. The exact figure depends on your gate’s weight, the brand of the operator, and what actually failed.
| Repair type | Typical cost in South Gate | What’s usually included |
|---|---|---|
| Hinge and bracket repair | $150 – $350 | Replacing worn hinges, welding brackets, realigning the gate leaf |
| Bent track or roller repair | $180 – $420 | New rollers, straightening or replacing damaged slide track |
| Gate won’t open / stuck gate | $150 – $400 | Diagnostic, freeing the gate, fixing the binding or motor fault |
| Sensor and safety device repair | $200 – $450 | Photo-eye, loop, or edge sensor replacement and recalibration |
| Control board or receiver | $250 – $600 | Replacing the board, receiver, or access keypad module |
| Motor / operator service | $300 – $900 | Motor repair or replacement, gear and limit tuning, lifting the operator |
| New remote or keypad programming | $75 – $180 | Programming remotes, replacing a keypad, adding entry codes |
| Commercial gate repair | $400 – $1,200 | Heavy slide/swing repair, commercial operator service, loop work |
What pushes a job toward the top of the range? A gate that’s been binding against a misaligned track for months, a commercial operator with a burnt-out board, or a setup where the motor needs to be lifted out on a heavy swing gate. We work on nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can usually source parts for what you already have instead of quoting a whole new system. If you’re only dealing with a stuck gate and want the general overview, our Gate Repair in South Gate page walks through the repair process.
What Affects Gate Repair Pricing in South Gate
Two gates that look identical from the street can land at very different prices once we open the operator housing. Here’s what actually moves the number.
- Gate type and weight. A 10-foot residential swing gate is a straightforward job. A 20-foot commercial slide gate with an embedded ground loop is a heavier lift, both for the parts and the time. Multi-unit properties along Atlantic Avenue or in the Alameda corridor tend to fall into that second bracket.
- Brand of the operator. Common residential operators like Mighty Mule and Ghost Controls use parts that are quick to get. Older commercial operators or a discontinued DoorKing board take longer to source, and that’s reflected in the labor. We service all nine brands, so we’re not guessing at a system we don’t know.
- What actually failed. A bad hinge is a cheap fix. A failed control board is not. Half of good pricing is a correct diagnosis, which is why we test the motor, sensors, and access controls before quoting a single part.
- Age and condition of the gate. South Gate sits close to the coast and gets heat and dust through the summer, and gate hardware weathers faster than homeowners expect. Rusted posts or a frame that’s pulling from the hinge side can turn a small repair into more work.
- Access and site conditions. A gate on a narrow lot with no room to stage parts, or a driveway that fits one vehicle, adds time. Commercial sites that need coordination with tenant traffic also cost more to schedule.
- Residential vs. commercial. Commercial gate operators are built heavier and serviced under different expectations. A commercial job on a South Gate strip mall or apartment complex carries higher labor and parts costs than a home driveway.
Should You Repair or Replace a Gate in South Gate?
Repair is almost always the cheaper path when the structure of the gate is sound and only the moving parts or the operator have failed. A full electric gate replacement with a new operator typically runs $2,500 to $6,000 or more, depending on the size and the access controls. A repair that fixes the actual problem usually costs a fraction of that. We don’t push replacements. If the motor can be repaired, the board can be swapped, or the hinge side can be rebuilt, that’s the job we’ll quote. Same system, fixed right. If a gate is genuinely beyond saving, we’ll tell you why, in plain terms, before you spend anything. Learn more about the full scope of what we handle on our home page.
How to Save on Gate Repair
There are a few practical ways to keep the number down without skipping the repair that actually matters.
- Get it looked at early. A gate that drags or hesitates is doing damage every time it moves. Fixing a binding track early is a $200 repair. Letting the motor strain against it for a year turns that into a motor replacement.
- Keep the driveway and track clear. Debris and dirt packed into the slide track is one of the most common causes of a gate that binds or stops halfway. A quick sweep goes a long way.
- Ask for a diagnostic first. A proper diagnostic before any parts are ordered keeps you from paying for a board you didn’t need. We’ll always tell you what failed and why.
- Fix the sensors along with the operator. If we’re already servicing the motor, replacing a worn sensor at the same time saves a second service call later.
- Don’t buy a whole new system to fix one part. We work across nine brands so we can repair what’s there. That alone saves most homeowners the cost of a full replacement.
The simplest step is a free estimate. Call (833) 620-0289 and we’ll come out, tell you what’s wrong, and put a real number in front of you before anything gets touched.
Can You Give Me an Exact Price Over the Phone?
For common jobs like a stuck gate, a bad hinge, or a dead remote, yes, we can usually give you a close range right away. For anything involving the motor, control board, or sensors, the honest answer is that the price depends on what’s actually failed inside the operator. We’d rather look at it than guess and surprise you later. Free estimates mean the diagnosis doesn’t cost you anything, and the quote you get is the quote for the work.
Electric Gate Repair in South Gate: What Costs More
Electric gate repair is a core part of what we do, not an add-on, and it’s where most of the cost range comes from. The motor, control board, safety sensors, and access controls are each their own system, and a failure in any one of them can stop the gate cold. Motors and operators are the biggest line item ($300 to $900 for most residential jobs). Boards and receivers run $250 to $600. Sensor repairs land at $200 to $450. Because we’re trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we can test the whole chain from the motor to the keypad and fix the part that’s actually causing the problem, not the one that’s easiest to sell.
What Does Commercial Gate Repair Cost in South Gate?
Commercial gate repair for South Gate apartment buildings, storage yards, HOAs, and retail sites typically runs $400 to $1,200 per service call, with heavy operator and board work at the higher end. Commercial operators like those from FAAC, BFT, and Elite are built to handle constant traffic, and when they fail it’s often a control board, a ground loop, or a worn gear assembly. We schedule around tenant traffic so the gate isn’t down longer than it needs to be, and we quote the repair before we start. Property managers and HOA boards get a clear breakdown they can approve without a back-and-forth.
FAQs – Gate Repair Cost
How much does gate repair cost in South Gate, CA?
Most residential gate repairs in South Gate cost $150 to $650, with the average around $280. Electric gate repairs involving the motor or control board run $250 to $900, and commercial gate work goes up to $1,200. Call (833) 620-0289 for a free, no-pressure quote for your exact gate.
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper. A repair typically runs $150 to $650, while a full replacement with a new operator usually starts around $2,500 and can climb past $6,000. Unless the gate’s frame or posts are structurally failing, fixing the existing system is the better call. Call (833) 620-0289 and we’ll tell you honestly which one you’re looking at.
Can you come out today?
In most cases, yes. We do same-day service across South Gate when the schedule allows, and a stuck or non-working gate gets priority. Call (833) 620-0289 early in the day and we’ll get you on the books. The estimate itself is free.
Do you charge for a diagnostic or estimate?
No. Estimates are free. We test the gate, find the fault, and give you a firm price before any work begins, so there’s no charge just to find out what’s wrong. Call (833) 620-0289 to set one up.
Why is my electric gate repair so expensive?
Electric gate repair costs more because there are several systems involved: the motor, the control board, the safety sensors, and the access controls. A motor or board replacement alone can run $250 to $900. The upside is that a proper repair on the right part is far cheaper than a new system, and working across nine brands means we can usually source the part instead of replacing everything. Call (833) 620-0289 for an exact number.
Getting a Straight Answer on Your Gate
If your gate is stuck, dragging, or the motor has quit, the worst thing you can do is let it sit while the damage spreads. We come out, diagnose it properly, and quote you a firm price before we touch anything. Free estimates, upfront pricing, and a repair-first approach on whatever brand you own. Call (833) 620-0289 today and we’ll get your gate moving again.
Pricing reflects the South Gate market as of 2026. Gate Repair South Gate offers free estimates – call (833) 620-0289.
What Our Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Gabriela Castillo"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Amit Reddy"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Kevin Novak