Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Maywood
If your gate in Maywood won’t open, drags on the sidewalk, or the motor just hums and does nothing, we can usually diagnose it the same day and fix it the same visit. We’re a dedicated gate repair company based right next door in South Gate, and we work on the brands Maywood homeowners actually have: LiftMaster, DoorKing, Elite, Mighty Mule, and more. Call (833) 620-0289 for a free estimate, and we’ll tell you over the phone what it likely costs before we even roll a truck.
Why Gate Repair South Gate Is Maywood’s Preferred Gate Repair Company
Maywood is a city where the gate isn’t a driveway accessory. It’s the front door. When a gate stops working on a street off Slauson or Alamo, there’s no side yard to walk around, no secondary vehicle entrance. The house is effectively locked up or left open. That’s why our response to Maywood matters more than our response to bigger, spread-out cities.
We’ve repaired and replaced gates all over the 90270 zip code, and our approach is built around what we actually find here: older wrought-iron gates hung on stucco pillars that cracked years ago, plus control boards in operators that stopped being manufactured before the iPhone existed. We don’t push you to replace a system that can be repaired. We tell you the truth about which path costs less over the next five years.
Oscar Villanueva leads our team and has dedicated his entire career to gates: electric gate systems, mechanical hardware, access control, and full installations. No fencing side jobs, no handyman detours. When you call us, you’re talking to someone who can describe the problem by the sound of the motor over the phone.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in Maywood
Gate welding in Maywood usually means one of two things: repairing a wrought-iron gate that’s cracked at the hinge point or the lower frame, or reinforcing a post that’s no longer holding the gate square. The tight sidewalks and zero-lot-line walls here mean a gate that sags even half an inch becomes a gate that scrapes concrete every time it swings. On the streets off Randolph and Atlantic, that scrape isn’t cosmetic, it’s a daily announcement that the gate is failing.
Hinge and Frame Repair
Most Maywood pedestrian gates fail at the hinge barrel or the lower stile, not in the middle of the panel. We cut out the cracked section, weld in new steel, and grind it smooth. Typical hinge or frame welding runs $180 – $320 depending on how much metal has fatigued and whether we’re working at ground level or on an ornamental archway.
Post Reinforcement
When a gate post has cracked at the base or pulled away from the masonry, welding the gate alone won’t hold. We reinforce or reset the post first, then re-hang the gate so the swing path clears the sidewalk. Post work alongside welding generally adds $150 – $400 to the job, and we’ll quote it all before a single bead is laid.
Commercial Gate Repair in Maywood
Commercial gate repair in Maywood covers the vehicular gates at apartment buildings on Atlantic, service entrances behind the commercial stretch on Slauson, and the small industrial yards tucked between the rail lines and the LA River. These gates cycle dozens or hundreds of times a day, and most were installed 10 to 20 years ago. The failure isn’t usually dramatic, it’s slow: a keypad that needs three tries, a motor that stalls halfway, a hold-open that trips and traps a delivery truck.
Operator and Access Control
We service commercial operators from FAAC, BFT, and DoorKing, plus a long tail of older Viking and Elite units still running on original machinery. A control board replacement on a commercial slide gate in Maywood typically runs $450 – $850, and we can usually source and install it within a few days rather than weeks.
Rack and Pinion Systems
Many Maywood apartment gates use rack and pinion drives because the lots are tight and the gates are short. The rack gets worn, the pinion loses teeth, and the gate jerks. Replacing the rack and pinion set runs $250 – $500 in parts, and our labor is quoted flat. We’d rather repair the drive than sell you a whole new operator, assuming the motor itself is healthy.
Trusted Brands We Service in Maywood
We’re a multi-brand gate specialist, certified to work on nine major gate automation systems. In Maywood, the brands we see most often are Mighty Mule and Ghost Controls on residential swing gates, DoorKing on apartment parking gates, and FAAC on the heavier commercial units. Because we stock common parts in our South Gate shop, we can often repair a LiftMaster or Elite system the same day without waiting on a distributor. We work on your brand, and the goal is simple: same system, fixed right.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Maywood Homes
- Sidewalk-dragging gates. On the narrow residential streets off Slauson and Randolph, gates open directly onto the sidewalk with only inches of clearance. A quarter-inch shift from a cracked stucco post means the gate grinds concrete every time. We reset the post, not the gate, because bending the gate back only lasts until the next rain.
- Dead control boards in legacy operators. Drought-to-rain cycles in Los Angeles County are hard on the control boards and wiring in older gate operators. We replace boards in pre-2010 units regularly, and we’ll tell you honestly whether that board is worth buying or whether the whole motor has one season left.
- Worn hinges on original wrought-iron gates. Many Maywood homes were built in the 1950s and 60s, and the original gate hinges are often original too. A worn hinge barrel lets the gate sag at the post, which throws off the alignment at the latch. We weld, replace, or re-bush the hinges depending on how much steel is left.
- Safety sensor faults on automatic gates. Older automatic gates in Maywood often predate California’s current safety requirements for photocells and reversing edges. When the sensors fail, the gate either won’t close or, worse, closes without reversing. If you have an automatic gate that moves on its own, treat it as a safety issue and call us before someone gets hurt.
Pricing for Gate Repair in Maywood, CA
A typical gate repair in Maywood runs $180 – $450 for most hinge, alignment, and hardware fixes. Electric gate repair, whether it’s a control board, a motor capacitor, or a safety sensor, usually lands between $250 and $650. Full gate installations or major retrofits run higher, $1,200 and up, depending on what’s being replaced and whether we’re doing new footings. We quote the full price before any work starts, and that price doesn’t change unless we find something and you approve it in writing first. Call (833) 620-0289 and Oscar will give you a straight number over the phone.
We Also Serve Cities Near Maywood
Our shop is in South Gate, which puts us minutes from Maywood and all its neighbors. We regularly serve Gate Repair in Bell Gardens, South Gate, Florence-Graham, and Central-Alameda, along with the rest of the 90270 area. If your property sits right on the Maywood border, don’t overthink the city line, we’ve likely been there already.
Serving Maywood, CA – Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Maywood
Bending the gate back is a temporary fix that usually lasts until the next time the post shifts or the weather changes. On Maywood’s narrow lots, the real problem is almost always a crack in the stucco or masonry hinge post, not the gate itself. We reset the post footing and re-hang the gate, which is the only repair that holds. Call (833) 620-0289 and we’ll give you a price over the phone.
It depends on the operator’s age and the condition of the motor itself, but in Maywood we regularly retrofit control boards on units that are 10 to 15 years old because the motors still have plenty of life left. A board replacement usually costs $250 – $500, far less than a new operator. The honest answer for a 20-year-old unit with a tired motor is to replace the whole thing, and we’ll tell you that too.
Automatic gates in California must have a reversing mechanism, typically photocells or an edge sensor, that stops and reverses the gate when something crosses the path. Older gates that were installed before these requirements often have no sensors at all. If your automatic gate doesn’t have visible photocells or a reversing edge, upgrade it now, call (833) 620-0289 and we’ll walk you through what’s missing.
Rack and pinion drives can absolutely be repaired. The rack teeth wear down and the pinion gear loses its edge, but the motor often has years of life left behind that. A typical rack and pinion repair in Maywood runs $250 – $500 in parts plus labor, and we’ll only recommend replacing the operator if the motor itself has failed or the drive is so obsolete that parts simply don’t exist anymore.
When a gate is your only way in or out, we treat it as a priority call. We can often reach Maywood addresses the same day, and if the repair is a hinge, alignment, or control board job, we can usually finish it the same visit. You’re not waiting on a fencing company that does gates on Thursdays. Call (833) 620-0289 and we’ll give you an arrival time, not a window.
The answer depends on whether it’s the operator, the hinges, or the control board, but in Maywood you’re looking at $180 – $450 for most mechanical gate repairs and $250 – $650 when the electric system is involved. We’ll quote the exact number before we start, and there’s no charge for the estimate. Call (833) 620-0289 and Oscar will help you figure out the likely cause right over the phone.
Written by Oscar Villanueva, owner of Gate Repair South Gate, serving Maywood and the surrounding communities as a full-time gate specialist.